Quantitative Analysis of Combustion Process of Marine Dual Fuel Engine under the Framework of Image

  • Hong-liang YU Dalian Maritime University
  • Shulin Duan Dalian Maritime University
  • Peiting Sun Dalian Maritime University

Abstract

The methane (CH4) burning interruption factor and the characteristic values characterizing the flame combustion state in the engine cylinder were defined. The logical mapping relationship between image feature values and combustion conditions in the framework of imagery was proposed. Results show that there are two periods of combustion instability and combustion stability during the combustion of dual fuel. The high temperature area with a cylinder temperature greater than 1800K is the largest at 17°CA after top dead center(TDC), accounting for 73.25% of the combustion chamber area. During the flame propagation, the radial flame velocity and the axial flame velocity are “unimodal” and “wavy”, respectively. During the combustion process, the CH4 burning interruption factor first increased and then decreased. The combustion duration in dual fuel mode is 21.25°CA, which is 15.5°CA shorter than the combustion duration in pure diesel mode.

References

AVL FIRE. 2008. AVL FIRE v2008 Description of calculation and control parameters in cylinder. Austria: AVL LIST 2008.

B. Yadollahi, M. Boroomand. 2013. A numerical investigation of combustion and mixture formation in a compressed natural gas DISI engine with centrally mounted single-hole injector. Journal of Fluids Engineering 135(9): 1-9.

Dong Quan,Cai Zhiyong,Song Enzhe,Ma Xiuzhen,Yao Chong,& Huang Tao. 2017. Characteristics of high-pressure gas jets for natural gas engine based on shock wave calibration. Transactions of CSICE. 35(1):44-52.

Feng Jinmei, Lu Zhimao, Yang Peng, & Zhang Zihong. 2014. Color image segmentation algorithm based on local priority. J. Huazhong Univ. of Sci. & Tech. (Natural Science Edition) 9:44-48.

I.Gy. Zsély, T. Nagy, J.M. Simmie, & H.J. Curran. 2011. Reduction of a detailed kinetic model for the ignition of methane/propane mixtures at gas turbine conditions using simulation error minimization methods. Combustion and Flame 158(8): 1469-1479.

Jiang Bing, Wu Zhaohui, & He Yuntang. 2015. Effect of combustion chamber’s shape of CNG engine on air flow and combustion characteristic. Transactions of the Chinese Society for Agricultural Machinery 46(1):338-344.

JS Holladay, J Lariviere. 2017. The impact of cheap natural gas on marginal emissions from electricity generation and implications for energy policy. Journal of Environmental Economics & Management 85, 205-227.

Lee, J. 2013. Comparison of the effects of multiple injection strategy on the emissions between moderate and heavy EGR rate conditions: part 1-pilot injections. Journal of Mechanical Science and Technology 27(4): 1135-1141.

Li Meng-han, Zhang Qiang, Li Guo-xiang, & Shao Si-dong. 2016. HC emission of high pressure DI diesel pilot-ignited natural gas engine. Journal of Zhejiang University (Engineering Science) 50(2):341-346.

Li Wei-feng, LIU Zhong-chang, WANG Zhong-shu, & DOU Hui-li. 2015. Effects of pilot diesel amount and equivalence ratio on combustion of a dual fuel engine under low loads. Transactions of CSICE. 6:481-490.

Michailidis, A.D., Stobart R.K., Mctaggart-Cowan G.P. & McTaggart-Cowan. 2013. Low temperature combustion optimization and cycle-by-cycle variability through Injection optimization and gas-to-liquid fuel-blend ratio. Journal of Engineering for Gas Turbines and Power 135(7):257-265.

O. Samimi Abianeh, C. P. Chen, & S. Mahalingam. 2014. Modeling of multi-component droplet coalescence in evaporating and non-evaporating diesel fuel sprays. International Journal of Automotive Technology 15(7):1091-1100.

P Sombatwong, P Thaiyasuit, & K Pianthong. 2013. Effect of pilot fuel quantity on the performance and emission of a dual producer gas–diesel engine. Energy Procedia 34(9):218-227.

Ryu, K. 2013. Effects of pilot injection pressure on the combustion and emissions characteristics in a diesel engine using biodiesel–CNG dual fuel. Energy Conversion and Management 76(12): 506-516.

V. Vuorinen, A. Wehrfritz, C. Duwig, & B.J. Boersma. 2014. Large-eddy simulation on the effect of injection pressure and density on fuel jet mixing in gas engines. Fuel 130:241-250.

Xiang La, Ding Yu, & Wang Kui. 2018. Influence of natural gas substitution rate on heat release rate of marine dual fuel engine. Journal of Harbin Engineering University 39(2):317-323.

Xu Zhou, Zeng Zhuo-xiong, & Xu Yi-hua. 2015. Numerical simulation of a swirling combustor with vortex cooling wall. Journal of Propulsion Technology 36(3):436-442.

Yu Hongliang, Duan Shulin, & Sun Peiting. 2017. Numerical simulation of combustion progress on dual fuel engines with different turbulence models. Journal of Engineering Research 5(4), 225-235.

Yu Hong-liang, DUAN Shu-lin, & SUN Pei-ting. 2016. Effect of main/pilot timings on combustion and emission characteristics of marine dual fuel engines. Journal of Propulsion Technology 37(9):1735-1741.

Yu Hong-liang, Duan Shu-lin, & Sun Pei-ting. 2015. Effect of LNG gasification temperature on combustion and emission characteristics of marine dual fuel engines. Journal of Propulsion Technology 36(9):1369-1375.

Zhang Bo, Ni Kaizao, Wang Linjun, Liu Shijie, & Wu Lunzhe. 2016. New algorithm of detecting optical surface imperfection based on background correction and image segmentation. ACTA OPTICA SINICA. 9:112-121.

Zhang Zhou-rong, Wang Qian, He Zhi-xia, Dai Li-ming, Wu Yu-qiang, & Gao Zhi-sheng. 2015. Research of in-cylinder high pressure direct injection and mixture of diesel and natural gas. Journal of Engineering Thermophysics 36(10):2262-2266.

Published
2021-12-04
Section
Mechanical Engineering