A unified approach for PI controller design in delta domain for indirect field-oriented control of induction motor drive
The parameterization of the dynamic system using delta operator provides a unified framework for modelling, analysis and control in which the continuous time results can be obtained from the discrete time results at high sampling limit. In this paper, a speed control strategy of induction motor based on indirect field orientation control (IFOC) has been proposed using delta operator. The continuous-time dynamic model of the induction motor has been considered for design of control scheme. The Proportional and Integral controller (PI) is designed in delta domain for IFOC of Induction Motor. The experiments are performed using MATLAB/Simulink platform and the results are provided to illustrate the usefulness of the methodologies.
Bimal K Bose, 2002. “Modern Power Electronics and AC Drives”
Goyat, S. and Ahuja, R. K, 2012. “Speed Control of Induction Motor using Vector or Field Oriented Control”, IJAET
Ohnishi T., Miyazaki H., and Okitsu H, 1988. “High Efficiency Drive of an Induction Motor by Means of V/F Ratio Control.” IECON Proceedings 14 Annual Conference, vol. 3, 780-785.
R. N. Andriamalala, H. Razik and F. M. Sargos, 2008. “Indirect-Rotor-Field Oriented-Control of a Double-Star Induction Machine Using the RST Controller.”, IEEE.
Zen Guo., J. Jhang., Z.Sun., C Zheng, 2016. Indirect field Oriented Control of Three Phase Induction motor based on Current Source Inverter,” Procedia Engineering, Vol. 174, 588 – 594.
Lorenz R.D., Yang S.M, 1992. “Efficiency-optimized flux trajectories for closed-cycle operation of field-orientation induction machine drives,” IEEE Transactions on Industry Applications, Vol. 28, 574 – 580.
P. H. Zhang, G. J. Yang, T. C. Li, 2006. “Study on the Vector Control Method of IM for Variable Speed Drive Based on DSP,” IEEE/RSJ International Conf. on Intelligent Robot and Sys, 4890–5. 6
Blaschke, F, 1972. “The principle of field orientation as applied to the new transvector closed-loop control system for rotating-filed machines,” Siemens. Vol.34, 217-220.
R. H. Middleton and G. C. Goodwin, 1990. Digital Control and Estimation-A Unified Approach, Prentice Hall, Englewood Cliffs, New Jersey.
P. Sarkar, 2001. “Reduced order modelling and controller design in delta domain,” Ph.D Thesis, Dept. of Electrical Engineering, IIT Kharagpur.
Tsuyoshi Shiota1 and Hiromitsu Ohmori2, 2013. “Design of I-PD control system using Delta operator,” SICE Annual Conference 2013, Nagoya University, Nagoya, Japan.
Hongyi Li, Yabin Gao, Peng Shi, 2015. “Output- Feedback Control for T–S Fuzzy Delta Operator Systems with Time-Varying Delays via an Input–Output Approach,”, IEEE Transaction on Fuzzy Systems, vol. 23, no. 4.
M. Ouhrouche, R. Beguenane, A.M. Trzynadlowski, J.S. Thongam, M. Dube-Dallaire, 2006. “A PC cluster based Fully Digital Real Time Simulation of a field Oriented Speed Controller for an Induction Motor”, International Journal of Modelling and Simulation, Vol. 26, No. 3.