Design and Development of Submerged Arc Welding Acidic Flux

Abstract

An acidic flux was intended and developed with the variation of some flux constituents. The basicity index of the flux was kept as 1.84. It was designed to weld the mild steel plates on submerged arc welding machine. A study was done with developed flux on two-level factorial design. Voltage and current were the controlled parameters along with feed rate, nozzle distance and creep feed as uncontrolled parameters selected for experimentation. Eight experiments were performed. Weld bead width and Hardness were the responses measured. Design expert software was used the do the analysis. Finally, it can be determined that travel speed was the most momentous factor for the hardness and weld bead dimensions of the joint.