WAMS based Real-time Voltage Stability Monitoring for various Load Models in the presence of a DFIG Integrated Wind Farm

Abstract

With rising global energy demand, transmission lines are operated at their limits, causing electrical grids to operate under extreme voltage instability conditions. To meet the increased load-demand and the forced tendency across the globe of tilting towards even more renewable generation, solar and wind farms are integrated with increased size and capacity. These uncontrolled natural power injection again may affect the system’s voltage stability. To avoid blackouts and to achieve the maximum voltage stability of power systems, operators need to do effective real-time grid monitoring and control at load terminals. Load models are important in the analysis of voltage stability, and accurate load models are useful in analysing the voltage stability conditions. Phasor-measurement-unit (PMU) based wide-area monitoring and smart-automation is an innovative technology for measuring load voltage magnitude, phase angle, and frequency variations in a DFIG integrated large wind power system. This research paper focuses on estimating the real-time voltage stability through the use of linear, nonlinear, and dynamic load models in presence of a DFIG based wind-farm in WSCC three-machine nine-bus power network using PMU data. This study is carried out using MATLAB-Simulink software.